C SERIES 42” CUT, Kawasaki FR600V Engine, 21.5hp

$7,799.00 $6,799.00

Lowest Price is Guaranteed, contact us today to make a deal.



  • Air Filter: Cartridge air filter
  • Blade(s): (2) Heavy-duty, heat treated, low-lift blades. 22.5″ x 2.50″ x .20″
  • Blade Drive: V-belt drive from engine to spindles with electric clutch.
  • Blade Tip Speed: 18,600 fpm @ 3,500 rpm engine speed.
  • Brakes: In Service: Hydrostatic dynamic braking. Parking: Sprocket and cog. When steering levers are placed in park position, integral park brakes are automatically engaged.
  • Charging System: 12-volt, 9-amp
  • Controls: Hand-operated choke, throttle, ignition switch, electric mower clutch, Integrated parking brakes
  • Construction: Mainframe is 1.5″ x 1.5″ x .120″ (3.8 cm x 3.8 cm x .34 cm) square steel tubing. Drive motors mounted to .120″ (.45 cm) welded steel. Front caster wheels mounted with roller bearings on each wheel. Front caster forks are .25″ (.64 cm) steel
  • Cooling: Air cooled. Fly-wheel fan
  • Caster Tyres: 11 x 4 – 5, rib tread
  • Cup Holder: One cup holder moulded into the left side fuel tank. Accommodates nearly any cup size.
  • Cutting Height(s): Foot-operated deck height adjustment. Pin for setting height, detent for transport position. Height adjustment in .25” increments from 1.0” to 4.5” (2.54 cm to 11.4 cm, .6 cm increments)
  • Cutting Widths: 42” cut
  • Deck System: Deck is suspended at the corners. Includes deck-mounted anti-scalp wheel to improve flotation in rolling and uneven terrain.
  • Deck Lift: Foot-operated deck height adjustment.
  • Discharge Chute: High density, rubberised.
  • Drive System: Dual hydrostatic. Hydro-Gear EZT integrated hydrostatic zero turn transaxles
  • Engine: Kawasaki FR600V
  • HP: 21.5 hp (16.0kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards.)
  • Fuel: Unleaded fuel – maximum of 10% ethanol in fuel (see engine manufacturers specifications)
  • Fuel Capacity: 7.95 L (2.1 US gal)
  • Fuel Filter: Replaceable, automotive-type
  • Governor: Mechanical
  • Ground Speed – Forward: 0-11.3 kph (0-6 mph)
  • Ground Speed – Reverse: 0-6.4 kph (0-4 mph)
  • Height: 39″ (990 mm)
  • Hydrostatic Drive: V -belt drive from engine crankshaft
  • Ignition: Electronic
  • Overall Length: 73.5″ (1870 mm)
  • Optional Accessories: Optional accessories available for purchase separately include: • Mulch Kit: BDA112610 – Blades included when purchasing this kit. Recycles clippings under deck allowing clippings to be cut and recut, then discharged down into the grass. Reduces handling of clippings, improves appearance, and recycles nutrients back to the soil. • Catcher: BDA929653 – Non-powered, two-bag catcher [order (1) 602414 blade]. • ROPS Kit: BDA603279 • Hour Meter Kit: BDA111167 • Light Kit: BDA110737 • Kit Arm Rest: BDA604436 • Steering Extension Kit: BDA333724
  • Oil Filter: Spin-on engine oil filter / Total oil capacity 2.2 U.S. qt. (2.1 litre) w/filter
  • Please Note: Specifications subject to change without notice.
  • ROPS: **No ROPS**
  • Safety Features: Operator presence system connected to clutch, seat, and park brakes.
  • Seat: Moulded-vinyl seat. Fore and aft adjustment. Seat suspension springs are standard.
  • Seat Suspension: Seat suspension springs are standard.
  • Spindles: Die cast aluminium housing 1″ (2.5 cm) diameter high carbon steel shafts and sealed ball bearings.
  • Steering: SmoothTrak™ twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls.
  • Starter: 12-volt
  • Trim Capacity: 2.5″ (6.35 cm) [left side]
  • Turning Radius: True zero turning radius .Turns within its own length. Counter-rotating, independent drive wheels
  • Type: Air cooled, 90 degree V-twin, normally aspirated petrol engine.
  • Tyres – Drive: 18 x 8.50 – 8, turf tread
  • Warranty: C Series: Residential To the original purchaser only Entire Product: 7 Year (4-7 years parts only) or 300 hours – whichever comes first. Pumps & Motors only: 3 year or 300 hours – whichever comes first. Deck Spindles & Bearings: 3 year or 300 hours – whichever comes first. Engine Only: As per manufacturer’s specifications. Warranty: C Series: Commercial Applications To the original purchaser only Entire Product: 90 Days Pumps & Motors only: 90 Days Deck Spindles & Bearings: 90 Days Engine Only: As per manufacturer’s specifications. Warranty: C Series: Rental Applications Entire Product: N/A Pumps & Motor only: N/A Deck Spindles & Bearings: N/A Engine Only: As per manufacturer’s specifications. Please Note: For further details on our warranty terms and conditions including all limitations and exclusions please refer to the warranty section on our web site or contact our friendly sales team.


There are no reviews yet.

Be the first to review “C SERIES 42” CUT, Kawasaki FR600V Engine, 21.5hp”

Your email address will not be published. Required fields are marked *